Sealers and curing compounds; water repellants are all
offered at Murray Decorative Concrete Supply. The following is a
product sampling.
TK Bright Glaze is especially formulated for
use on colored and stamped concrete. It is a 100 methacryate
polymer blended with aromatic solvents with no filler added.
Gives extra protection from freeze-thaw cycles, deicing salts
and chemical erosion. it is a clear coating that does not
yellow. High Gloss.
Euclid Everclear is a pure acrylic sealer that
protects and enhances the appearance of cured concrete. It is
clear, non-yellowing and breathable. It enhances colored
concrete including stamped, decorative overlays and
acid-stained. Satin Finish.
Euclid Super Diamond Clear VOX is an acrylic emulsion
blend curing and sealing compound. Gives a reduced odor
alternative to total solvent based systems and provides a clear,
non-yellowing seal for new or existing concrete. Provides a
glossy finish and easier clean-up.
TK-1572 Water Base Urethane: Clear, glossy,
non-yellowing water based urethane. It has special resistance
properties where acrylic finishes will not be adequate.
TK Bright Kure & Seal Matte: This is Bright
Kure and Seal with a matting agent to remove the gloss, but
retain its ability to highlight the color in decorative
concrete.
Tamms Luster Seal 300 is a clear non-yellowing
solvent based sealer, cure and hardener for concrete. Uses:
driveways, pavers, stamped & decorative concrete, patios,
garages, etc. Provides glossy, "wet" look.
Concrete Countertop Finishes: For
concrete floor hardeners TK-5329 is colorless odorless. This
sodium silicate penetrates and reacts with the free lime and
calcium carbonate in the concrete. It then leaves a hard film
which hardens, dust-proofs and seals the surface.
Epoxy Coatings: enPoxy - a two part, water
clear, 100% epoxy that provides complete protection from
household stains and chemicals. The high gloss shine may be
buffed down to a satin finish and still provide stain and
bacteria protection.
Chemstop WB Heavy Duty: A water-based, ready to
use, siloxane/silane water repellant.
Euco Diamond Hard: A blend of silicate and
siliconate polymers that penetrate concrete surfaces and
chemically react to provide an increase in surface density,
durability, and abrasion resistance. Dustproofs resists tire
marks and are easier to maintain. May be used in conjunction
with acid stain or dyes.
