|
Sealers and curing compounds; water repellants are all offered at Murray
Decorative Concrete Supply. The following is a product sampling.
TK Bright Glaze is especially formulated for use on colored and
stamped concrete. It is a 100 methacryate polymer blended with aromatic solvents
with no filler added. Gives extra protection from freeze-thaw cycles, deicing
salts and chemical erosion. it is a clear coating that does not yellow. High
Gloss.
Euclid Everclear is a pure acrylic sealer that protects and
enhances the appearance of cured concrete. It is clear, non-yellowing and
breathable. It enhances colored concrete including stamped, decorative overlays
and acid-stained. Satin Finish.
Euclid Super Diamond Clear VOX is an acrylic emulsion blend curing
and sealing compound. Gives a reduced odor alternative to total solvent based
systems and provides a clear, non-yellowing seal for new or existing concrete.
Provides a glossy finish and easier clean-up.
TK-1572 Water Base Urethane: Clear, glossy, non-yellowing water
based urethane. It has special resistance properties where acrylic finishes will
not be adequate.
TK Bright Kure & Seal Matte: This is Bright Kure and Seal with a
matting agent to remove the gloss, but retain its ability to highlight the color
in decorative concrete.
Tamms Luster Seal 300 is a clear non-yellowing solvent based
sealer, cure and hardener for concrete. Uses: driveways, pavers, stamped &
decorative concrete, patios, garages, etc. Provides glossy, "wet" look.
Concrete Countertop Finishes: For concrete floor hardeners
TK-5329 is colorless odorless. This sodium silicate penetrates and reacts with
the free lime and calcium carbonate in the concrete. It then leaves a hard film
which hardens, dust-proofs and seals the surface.
Epoxy Coatings: enPoxy - a two part, water clear, 100% epoxy that
provides complete protection from household stains and chemicals. The high gloss
shine may be buffed down to a satin finish and still provide stain and bacteria
protection.
Chemstop WB Heavy Duty: A water-based, ready to use,
siloxane/silane water repellant.
Euco Diamond Hard: A blend of silicate and siliconate polymers
that penetrate concrete surfaces and chemically react to provide an increase in
surface density, durability, and abrasion resistance. Dustproofs resists tire
marks and are easier to maintain. May be used in conjunction with acid stain or
dyes.
|